professional tool quality est. 1973

Testing Equipment

1 - 24 (31)Number:
3350.jpg
Article number: 3350
  • Most modern diesel vehicles usually have common rail systems, which operate with pressure above 1000 bar. Trouble Shooting often takes place by tracking the digital signals of pressure sensors in the vehicle. But malfunctioning or wrongly set sensors can lead to inaccurate results. The Condor Common Rail High Pressure Tester measure the real pressure with an analog 2000 bar glycerin-filled manometer, manufactured from stainless steel.
  • manometer max. 2000 bar, stainless steel with protective rubber coating, relief valve 1400 bar
  • testing functions:
    starting pressure of high pressure pump
    operating pressure in various rpm ranges – also on running engine
    maximum pressure of high pressure pump
    leaks and dripping of individual injectors
    accessory kit Nr. 3351 allows to check the correct functioning of the high pressure pump and pressure sensor
3351.jpg
Article number: 3351
  • extends the scope of applications for common rail high pressure tester No. 3350:
    testing for correct functioning of the pressure sensor
    testing for correct functioning of the high pressure pump
  • includes comprehensive o-ring assortment
3532.jpg
Article number: 3532
  • troubleshooting by measuring the return flow of diesel injectors
  • simultaneous measurement of up to 6 injectors
  • measurement conducted either with directly connectable flasks or with measuring bottles and connecting hoses
  • includes holding bar with hooks for measuring bottles
9710.jpg
Article number: 9710
  • professional smoke generator for quickly locating leaks on the vehicle, e.g. on seals, throttle valve shafts, engine blocks, intake, exhaust, crankcase and air charge systems, tank, fuel, AdBlue® and additive systems, cooling and wiper water systems and various fittings
  • integrated compressor for testing with air pressure, continuously adjustable via rotary control
  • pressure gauge for determining pressure drop and smallest leaks
  • fog function for leaks that are difficult to locate, can be switched on and off at any time
  • automatic switch-off of the fog generator in the event of overheating
  • with comprehensive sealing plug set incl. practical inflation adapter, e.g. for sealing hoses during testing
  • suitable for use with UV leak detection agents, which, in conjunction with UV goggles and lamp, enables even faster leak detection
  • fog oil drain plug for emptying when not in use for longer periods
  • power supply either via 220 V power adapter or 12 V vehicle battery for maximum mobility and flexibility
5036.jpg
Article number: 5036
  • extra flat design with 90° offset air coupler for confined engine spaces
  • for safe and quick checking for leaks in the turbo charger system
  • suitable for all turbo charger systems with hose connections
  • not suitable for bajonett connections
  • can be operated with any common tire air inflator, no additional tools required
  • also suitable for drained cooling systems
  • also suitable for checking the exhaust gas recirculation valve, depending on vehicle specifications
  • hose with pressure relief valve, to prevent damage from too high testing pressure
  • 6 pairs of plug adaptors, each pair one adaptor with and one without air coupler
5035.jpg
Article number: 5035
  • suitable for all turbo charger systems with bajonett connections
  • for safe and quick checking for leaks in the turbo charger system
  • extra flat plug connectors for narrow working spaces
  • can be operated with any common tire air inflator, no additional tools required
  • can be used in combination with leak detection spray, to identify and localize very small leaks
  • also suitable for checking the exhaust gas recirculation valve, depending on vehicle specifications
  • hose with pressure relief valve, to prevent damage from too high testing pressure
3550.jpg
Article number: 3550
  • 2-way function to produce either vacuum or pressure
  • suitable for brake bleeding and for testing various vacuum and pressure functions on vehicles
  • supplied with comprehensive range of accessories, suitable for all popular vehicles
3557.jpg
Article number: 3557
  • solid metal construction
  • for inspection and setting low-pressure systems e.g. on ignition control, carburetor, exhaust gas recirculation, central locking, turbocharger timing
  • for suction extraction of various fluids, e.g. when changing brake fluid
33549.jpg
Article number: 33549
  • troubleshooting without disassembling cylinder head
  • to diagnose compression faults on:
    inlet and exhaust valves
    piston rings and cylinder chamber
    cylinder head and gaskets
33541.jpg
Article number: 33541
  • comprehensive assortment, suitable for the most common diesel engines
  • with pressure gauge (0-70 bar) and hose connection with quick coupling
  • 12 adapters, suitable for glow plug and injection nozzle threads
  • incl. angled connection adapter and gasket assortment
33541_12-72.jpg
3546.jpg
Article number: 3546
  • for diesel engines with max. 600 bar injection pressure
  • for testing the spraying function for:
    leaks
    opening pressure of nozzles
    spraying pattern
  • includes 2 connectors
33548.jpg
Article number: 33548
  • for petrol engines in cars and motorcycles
  • with digital manometer and quick coupler, display in kpa / bar / mpa / psi and kg/cm²
  • with data-hold-function and memory function for measurements of up to 16 cylinders
  • illuminated display
  • with 4 adapters, for spark plug threads
  • with 2 rubber-coated thrust pieces, straight and bent
3540.jpg
Article number: 3540
  • for measuring compression pressure on petrol engines
  • flexible hose, length 300 mm
  • manometer with 0 - 20 bar display
  • combined connector M14x1.25 / M18x1.5
351.jpg
Article number: 351
  • for engines with petrol injection
  • with manometer
  • with hose connector assortment
  • with comprehensive adapter assortment for German, American and Japanese vehicles
  • suitable for following injection systems:
    CIS-Digital, DIGIFANT 1 and 2, EFI, K- / L-/ LH-Jetronic, Motronic, MPFI, Single Point and Multipoint, SPI, TBI and Weber CFI
33544.jpg
Article number: 33544
  • for oil pressure measurement and diagnosis of leaks in the oil system
  • manometer with scale from 0 - 10 bar (0 - 145 psi) (tolerance +/-5%) and flexible hose, length 1150 mm
  • connection adapter in metric and inch
3547.jpg
Article number: 3547
  • for synchronising carburetors on cars and motorcycles
  • suitable for up to 4 carburetors
5044.jpg
Article number: 5044
  • for many popular cars and vans
  • comprehensive set with pressure and vacuum pumps, thermometer and radiator test caps
  • for testing leak tightness in radiators and other cooling systems
  • for testing correct functioning of the pressure-relief valve at the sealing of the radiator or expansion tank
  • pressure loss control through manometer on pressure pump
  • measuring range 0 - 2.5 bar
  • for testing radiator caps
  • includes vacuum pump for cleaning and filling cooling systems
355a.jpg
Article number: 355A
  • for leak detection in radiators and heaters and checking the correct functioning of the pressure-relief valve at the radiator sealing respectively expansion tank
5045.jpg
Article number: 5045
  • suitable for almost all water-cooled engines
  • The vacuum cooling system refiller produces a vacuum in the entire cooling system. This allows for leak detection. The existing vacuum permits bubble-free refilling of the cooling system without the necessity of subsequent bleeding.
  • universal rubber cone, with 2 interchangeable extension pieces
5041.jpg
Article number: 5041
  • for all cooling systems without inner thread on seal
  • suitable for ø 30 - 50 mm through interchangeable rubber seal attachments
  • high cost efficiency, replaces many conventional bayonet and screw connectors
  • solid metal body - worn out rubber seal attachments available as spare part
  • accessory to No. 355A and No. 5044
355a-21_var.jpg
Article number: 355A-21
  • for sets No. 355A and 5044
  • suitable for:
    Fiat Croma years ´05-´13
    Ford Fusion years ´06-´12
    Mazda 6 year 2006
    Vauxhall Astra years ´04 -´13 / Astra Cabrio years ´03-´05 / Astra Coupe years ´03-´05 / Astra GTC years ´05-´11 / Corsa years ´06-´13 / Meriva years ´06-´10 / Signum years ´03-´08 / Vectra years ´02-´08 / Vectra years ´02-´08 / Zafira years ´05-´11
    Saab 9-3 years ´03-´12 / 9-3 Sport years ´02-´12 / 9-3 X years ´09-´12
355a-22.jpg
Article number: 355A-22
  • for sets No. 355A and 5044
  • suitable for:
    BMW 5-series, 7-series, GT, X5, X6
    Land Rover, Range Rover years ´03-´07
    Mini Cooper, Cooper Cabrio, Cooper S, Cooper S Cabrio, Cooper Clubman, Cooper S Clubman, Cooper Countryman, Cooper Coupe, Mini One, One Countryman, Coupe, Roadster, Mini Cooper Works
5043.jpg
Article number: 5043
  • comprehensive set with pressure pump with manometer (0 – 2.5 bar), pressure hose and seven radiator test caps for many popular trucks
  • for testing leak tightness in radiators and other cooling systems
  • for testing correct functioning of the pressure-relief valve at the sealing of the radiator or expansion tank
  • pressure loss control through manometer on pressure pump
1 - 24 (31)