Article number: 8752

Thrust Plate Adapter, for using No. 5452 with air hammer

to apply thrust plates from bearing and set drivers sets Nr. 5452 and 5453 with impact hammers with round shank ø 10 mm

Features

Round Shank:

ø 10 mm

Product is accessory of

Accessory/Extensions of:

			Description	Round Shank	Weight	pcs
Article number: 8810	Air Hammer, quick release coupler, round shaft ø 10.2 mm Description: quick release coupler, Round Shank: ø 10 mm, Weight: 1.9 kg, pcs:	Air Hammer, quick release coupler, round shaft ø 10.2 mm powerful air hammer, universal tool for loosening corroded or tight connections the combination of long stroke and large piston produces over 2000 highly powerful impacts per minute these vibrations loosen wheel bearings, bushes, conical seat connections (e.g. in track rod ends) and corroded screw connections the vibrations support intrusion of grease, thus helping with disassembly of silent bushes to be applied with specialist chisel set Nr. 8760 and other specialist accessory, making it a universal helper in any workshop can of course also be used for any standard application requiring chisels with quick coupling for chisel intake technical data: air inlet: 1/4" blows per minute: 2100 piston stroke: 92 mm recommended hose inner-ø: 3/8" (9.5 mm) working pressure: 6.2 bar	quick release coupler	ø 10 mm	1.9 kg
Article number: 5452	Bearing and Seal Driver Set, 51 pcs., ø 18-74 mm Description: , Round Shank: , Weight: , pcs: 51	Bearing and Seal Driver Set, 51 pcs., ø 18-74 mm to press and extract bearings, bushes etc. 49 thrust plates: ø 18 - 65 mm (increasing by 1 mm each size), 74 mm 1 receiver, can hold max. 2 thrust plates 1 impact driver use accessory thrust plate adapter No. 8752 (not included) to apply thrust plates with air hammer No. 8810 also suitable for using in workshop press				51
Article number: 5453	Bearing and Seal Driver Set, 21 pcs., ø 70-150 mm Description: , Round Shank: , Weight: , pcs: 21	Bearing and Seal Driver Set, 21 pcs., ø 70-150 mm to press and extract bearings, bushes etc. 17 thrust plates: ø 70 - 150 mm (increasing by 5 mm each size) 2 receivers, can hold max. 2 thrust plates 1 impact driver 1 hexagon key, 3 mm use accessory thrust plate adapter No. 8752 (not included) to apply thrust plates with air hammer No. 8810 also suitable for using in workshop press				21