|
Article number: 5445 |
|
- hydraulically assisted puller, reduces effort during disassembly
- with optional accessory also applicable as wheel hub puller
- hydraulic spindle can be operated by hand or ratchet
- for 4 and 5-hole wheel hubs with hole circle between 98-125 mm
- spindle pressure: max. 12 t
|
|
Article number: 5445-AF |
|
- for extracting propshafts and pulling wheel hubs
- for 4 and 5-hole wheel hubs with hole circle between 98-125 mm
- to be operated with sliding hammer or hydraulic spindle
- connecting thread: UN1.1/2"x16
|
|
Article number: 5445-M18 |
|
- accessory, required when operating flange No. 5445/AF with sliding hammer No. 4925
- for pulling wheel hubs
|
|
Article number: 5501 |
|
- connecting thread: UN1.1/2"x16
|
|
Article number: 4925-AF |
|
|
|
Article number: 4928-AF |
|
|
|
Article number: 4802 |
|
- for counter holding the wheel hub when loosening/tightening the central screw or drive shaft screw connection
- for wheel hubs with wheel fixing thread M12 or M14
- 2 plastic adapters for wheel hub cups of different depths
- allows working without a second person
|
|
Article number: 5208 |
|
- for driveshaft and propshaft screw connections, crankshaft center bolts, gearbox flange, screwed supporting joints etc.
- for hexagon screw connections in propshafts
|
|
Article number: 37148 |
|
- for driveshaft and propshaft screw connections, crankshaft center bolts, gearbox flange, screwed supporting joints etc.
- for hexagon screw connections in propshafts
|
|
Article number: 4808 |
|
- for driveshaft and propshaft screw connections, crankshaft center bolts, gearbox flange, screwed supporting joints etc.
- for hexagon screw connections in propshafts
|
|
Article number: 4803 |
|
- for driveshaft and propshaft screw connections, crankshaft center bolts, gearbox flange, screwed supporting joints etc.
|
|
Article number: 4803-41A |
|
- for disassembly/assembly of the lower bolted suspension joints on the front axle
- in BMW 5-series (F07, F10, F11), 6-series (F06, F12, F13) and 7-series (F01, F02, F03, F04)
- e.g. for suspension joint OEM 31126777753
|
|
|
|
- for driveshaft and propshaft screw connections, crankshaft center bolts, gearbox flange, screwed supporting joints etc.
|
|
Article number: 15011-K18 |
|
- for loosening and tightening of:
wheel bearing screw on rear axle of e.g. Audi A3, VW Golf V, Polo, Touran and identically constructed Skodas
central locking screw on rear axles of e.g. Audi A3, Golf V and Seat Altea - ideal for use in combination with telescopic ratchet Condor Nr. 22555
|
|
Article number: 5002 |
|
- e.g. for assembly work on running gear of recent Audi / VW models
|
|
Article number: 37152  |
|
|
|
|
|
- for disassembly/assembly of the drive shaft bolts on the gearbox side
- the special length allows working without dismantling the wheel
- e.g. for vehicles from the VAG Group
|
|
Article number: 13352-6 |
|
- offset tip for better access to the screws
- for disassembly/assembly of the right-hand stub shaft
- for vehicles with 6-speed manual gearbox 0A5 (all-wheel drive) and 02N
- in VW Transprter (from '04), Sharan (1996)
|
|
Article number: 4840 |
|
- for cleaning and rethreading drive shaft threads
|
|
Article number: 5439 |
|
- for assembling drive shaft gearing into wheel hub
- also for corroded or dirty wheel hubs
- avoids hammer strike damage to bearings
- manufactured from high-strength steel
- for e.g. VW, Audi, BMW, Porsche, Subaru
- 6x feeder nuts:
M16x1.5, M20x1.5, M22x1.5, M24x1.5, M27x1.5, M30x1.5
|
|
Article number: 4573 |
|
- for front-wheel driven vehicles
- for replacing the boot without disassembly of the driveshaft
- suitable for Audi, Seat, Skoda, VW and many other manufacturers
- place separator over driveshaft and connect with traverse, then operate driveshaft bolt to disconnect the joint from the driveshaft
|
|
Article number: 5438 |
|
- for easy levering of drive shafts (also with spring washer) out of the gearbox housing
- for use on vehicles with front wheel drive, e.g. Ford, Mazda, Volvo, Renault, Dacia
- reduces the risk of damage to the joint and transmission housing
- handle with dip insulation, made of hardened steel with specially heat-treated lever points
|
|
Article number: 4745 |
|
- for lock rings on e.g. driveshafts and transmissions
|
|
|
|
- for lock rings on e.g. driveshafts and transmissions
|
