Tap and Die
289 available
metric M3 - M12, in strong metal caseeach size 1 set hand taps, 3 pcs. M3, 4, 5, 6, 8, 10, 12each size 1 die M3, 4, 5, 6, 8, 10, 12 1 tap wrench M3 - M12 1 die holder 25 x 91 screwpitch gauge 1 screwdriver
158 available
metric M2 - M18, normal and fine threadeach size 1 die + 2 taps:M2 x 0.40, M3 x 0.50, M4 x 0.70, M5 x 0.80, M6 x 0.75, M6 x 1.00, M7 x 0.75, M7 x 1.00, M8 x 0.75, M8 x 1.00, M8 x 1.25, M9 x 0.75, M9 x 1.00, M9 x 1.25, M10 x 0.75, M10 x 1.00, M10 x 1.25, M10 x 1.50, M11 x 0.75, M11 x 1.00, M11 x 1.25, M11 x 1.50, M12 x 0.75, M12 x 1.00, M12 x 1.25, M12 x 1.50, M12 x 1.75, M14 x 1.00, M14 x 1.25, M14 x 1.50, M14 x 2.00, M16 x 1.00, M16 x 1.50, M16 x 2.00, M18 x 1.50accessory: 2x die holder M25 and M38 2x tap wrench M3-M12 and M6-M20 1x T-handle for taps
57 available
metric M6 - M24, normal and fine threadeach size 1 tap + 1 die: M6 x 0.75, M6 x 1.00, M8 x 1.00, M8 x 1.25, M10 x 1.25, M10 x 1.50, M12 x 1.50, M12 x 1.75, M14 x 1.50, M14 x 2.00, M16 x 1.50, M16 x 2.00, M18 x 1.50, M18 x 2.50, M20 x 1.50, M20 x 2.50, M22 x 1.50, M22 x 2.50, M24 x 1.50, M24 x 3.00accessory: die holder with reducer tap wrench M6 - 24 t-handle for taps screwdriver
272 available
metric M6 - M24, normal and fine threadeach size 1 tap + 1 die: M6 x 0.75, M6 x 1.00, M8 x 1.00, M8 x 1.25, M10 x 1.25, M10 x 1.50, M12 x 1.50, M12 x 1.75, M14 x 1.50, M14 x 2.00, M16 x 1.50, M16 x 2.00, M18 x 1.50, M18 x 2.50, M20 x 1.50, M20 x 2.50, M22 x 1.50, M22 x 2.50, M24 x 1.50, M24 x 3.00accessory: die holder with reducer tap wrench M6 - 24 t-handle for taps screwdriver
63 available
inch 1/4" - 1", normal and fine threadeach size 1 die + 1 tap:1/4NF28, 1/4NC20, 5/16NF24, 5/16NC18, 3/8NF24, 3/8NC16, 7/16NF20, 7/16NC14, 1/2NF20, 1/2NC13, 9/16NF18, 9/16NC12, 5/8NF18, 5/8NC11, 3/4NF16, 3/4NC10, 7/8NF14, 7/8NC9 1NF14, 1NC8accessory: die holder with reducer tap wrench t-handle for taps screwdriver
47 available
85 available
short machine tap, metric, M3, 4, 5, 6, 8, 10, 12 core hole drill, HSS-G, black-oxide, ø 2.5, 3.3, 4.2, 5.0, 6.8, 8.5, 10.2 mm adjustable tap wrench, DIN 1814, 180 mm, No. 1.1/2, M1 - M12
172 available
short machine tap, metric, M3, 4, 5, 6, 8, 10, 12 core hole drill, HSS, ø 2.5, 3.3, 4.2, 5.0, 6.8, 8.5, 10.2 mm adjustable tap wrench, DIN 1814, 180 mm, No. 1.1/2, M1 - M12
126 available
perfect for hard-to-reach areas extra short twist drill and tap bits with 1/4" hex shank space saving micro reversible bit ratchet includes 2 bit holders to extend the drills when required
279 available
3-in-1: core drilling, thread cutting, deburring and countersink 1 adapter, 1/4" hex, for 1/4" bits M3x0.5 mm, M4x0.7 mm, M5x0.8 mm, M6x1.0 mm, M8x1.25 mm, M10x1.5 mm
177 available
3-in-1: core drilling, thread cutting, deburring and countersink 1 adapter, 1/4" hex, for 1/4" bits M3x0.5 mm, M4x0.7 mm, M5x0.8 mm, M6x1.0 mm, M8x1.25 mm, M10x1.5 mm
164 available
466 available
121 available
DIN 352, in plastic box
163 available
reversible left / right, for taps
62 available
DIN 1814, cast zinc, hardened jaw for taps
53 available
for taps with external square drive 2.7 - 8.5 mm (corresponds to approx. M1.5 - M12 or 1/16 - 1/2" NF/NC) to be operated with ratchet, sliding t-bar or any other drive tools especially useful for reaching deep spaces when combined with an extension bar strong magnet holds taps firmly in place
27 available
DIN 223, in plastic box
Only 9 left
DIN 225 (DIN EN 22568), cast zinc, for round dies
50 available
185 available
with 1/4″ hex drive for threaded rods, round rods, screws, tubes etc. e.g. for renewing threaded attachments on drive shafts, wheel hub stud bolts, track rods suitable for stainless steel, steel, copper, brass, wood, fibreglass and plastics cutting tips made of high-strength tungsten steel
467 available
with 9 mm hex drive for threaded rods, round rods, screws, tubes etc. e.g. for renewing threaded attachments on drive shafts, wheel hub stud bolts, track rods suitable for stainless steel, steel, copper, brass, wood, fibreglass and plastics cutting tips made of high-strength tungsten steel
100 available
for repairing damaged threads and plating threads in materials with low shearing strengthsupplied in metal case5 twist drills5 taps5 installation tools5 tang breakers110 thread inserts
133 available
for repairing damaged threads and plating threads in materials with low shearing strengthsupplied in metal case1 twist drill1 tap1 installation tool1 tang breakerthread inserts (15 respectively 25 pcs.)