Running Gear - Paschke Profitec

for changing bearings on the front and rear axle without removing the axle. e.g. hydro bearing, plastic bearings, silent bearings, suspension joints, shock absorber rubber for bearing replacement on engine mounts, longitudinal and transverse control arms without removing the axle enables the use of Paschke thrust piece sets, wheel hub and bearing extraction sleeve, etc. saves up to 3 hours of time, as the axle parts do not have to be removed

for changing bearings on engine mounts, front and rear axle e.g. hydromounts, plastic mounts, silent mounts, suspension joints enables the use of Paschke thrust piece sets, bells, etc. trailing links, control arm, etc. no longer have to be removed, thus depending on the application up to 3 hours time saving

with thread and protective cap with 3/8" connection thread for coupling delivery without coupling and tension/compression bolt

cylinder side, with 3/8" NPT external thread e.g. for hydraulic cylinder 32102504 for connection with hydraulic foot pump also suitable for Celette / Enerpac / Sun

hose side, with 3/8" NPT internal thread e.g. for hydraulic cylinder 32102504 for connection with hydraulic foot pump also suitable for Celette / Enerpac / Sun

hose side, with 3/8" NPT internal thread e.g. for hydraulic cylinder 32102504 for connection with hydraulic foot pump also suitable for Nike

Ball joint lockable for positioning directly on the vehicle for mounting the hydraulic cylinder on a transmission jack with ø 30 mm incl. adapter sleeve for reduction to ø 25 mm two different clamp sizes available:item 33200602 - ø 72-82 mm for Paschke, Klann, Enerpac, Hazet, Wallmek.item 33200605 - ø 95-100 mmPlease order matching clamp

for cylinders from Paschke, Klann, Enerpac, Hazet, Wallmek for use with safety holder art. 32200401

for silent bearing and support joint tool set required drive: e.g. hydraulic cylinder, mechanical spindle

 for basic frame 33201607 also replacement for basic unit hydraulic, item 33202303

for use with spindle 33201501

for use with adaptorr, item 33201603

e.g. for cylinders from Klann / Longus / Berner for the use of Paschke basic frames with hydraulic cylinders of other manufacturers

for the use of Paschke basic frames with hydraulic cylinders of other manufacturers for cylinders from e.g. Enerpac (12 t version)

for use with hydraulic cylinder 32102504

for higher leverage for use with thrust bolt 33202603

reinforced version with stepped shaft (M20) for use with hydraulic cylinder 32102504

reinforced version 17 mm shaft for use with Klann cylinder KL-0040-2500

for use when changing wheel bearings, wheel hubs, etc. ball bearing

for tension bolt with thread M20, e.g. 31502604, 32102502

suitable for spindles with M27

for use with hydraulic cylinder 32102504 e.g. for working with wheel bearing tool