Air Hammer, quick release coupler, round shaft ø 10.2 mm
Air Hammer, quick release coupler, round shaft ø 10.2 mm
90 available
Product information "Air Hammer, quick release coupler, round shaft ø 10.2 mm"
- powerful air hammer, universal tool for loosening corroded or tight connections
- the combination of long stroke and large piston produces over 2000 highly powerful impacts per minute
- these vibrations loosen wheel bearings, bushes, conical seat connections (e.g. in track rod ends) and corroded screw connections
- the vibrations support intrusion of grease, thus helping with disassembly of silent bushes
- to be applied with specialist chisel set Nr. 8760 and other specialist accessory, making it a universal helper in any workshop
- can of course also be used for any standard application requiring chisels
- with quick coupling for chisel intake
- technical data:
air inlet: 1/4"
blows per minute: 2100
piston stroke: 92 mm
recommended hose inner-ø: 3/8" (9.5 mm)
working pressure: 6.2 bar
| Description: | quick release coupler |
|---|---|
| Round Shank: | ø 10 mm |
| Weight: | 1.9 kg |
| Length: | 325 mm |
| Width: | 190 mm |
| Height: | 62 mm |
| Weight: | 2,476 kg |
| EAN: | 4037374088101 |
different diameters for the most popular bolt sizesreduced shaft with specialist profile prevents the punch from getting stuck in bore holesuitable for all common air hammers, e.g. Condor No. 8810
impact socket adapter, for loosening tight and corroded screws through impacts and turn movementimpact chisel, flat head, universal application for many tight connections, e.g. wheel bearings, bushes, ball pins, silent bushes, conical seatsimpact chisel, radial milled head, for loosening track rod connections
to apply thrust plates from bearing and set drivers sets Nr. 5452 and 5453 with impact hammers with round shank ø 10 mm
to press and extract bearings, bushes etc.49 thrust plates: ø 18 - 65 mm (increasing by 1 mm each size), 74 mm1 receiver, can hold max. 2 thrust plates1 impact driveruse accessory thrust plate adapter No. 8752 (not included) to apply thrust plates with air hammer No. 8810also suitable for using in workshop press
to press and extract bearings, bushes etc.17 thrust plates: ø 70 - 150 mm (increasing by 5 mm each size)2 receivers, can hold max. 2 thrust plates1 impact driver1 hexagon key, 3 mmuse accessory thrust plate adapter No. 8752 (not included) to apply thrust plates with air hammer No. 8810also suitable for using in workshop press
to be operated with air hammerafter removing the nut, the guide sleeve is used to lead the pin punchincludes extension bolteasy disassembly through vibration effect
to be operated with air hammerextra long shaft with center ball on tipAfter separating the hexagon screw head, the clamp bolt is driven out of the axle housing. The high impact rate combined with powerful impacts breaks up corrosion and allows rust remover to enter.
blade width: 23 mmfor separating exhaust pipes without causing damageturnable, can be applied in almost any positioncan be used with any popular air hammeralso suitable for other applications
blade width: 23 mmfor separating exhaust pipes without causing damageturnable, can be applied in almost any positioncan be used with any popular air hammeralso suitable for other applications
blade width: 23 mmfor separating exhaust pipes without causing damageturnable, can be applied in almost any positioncan be used with any popular air hammeralso suitable for other applications
for separating ball joints e.g. on track rodsforged carbon steelcan be operated manually or by air hammer
for separating ball joints e.g. on track rodsforged carbon steelcan be operated manually or by air hammer
to be operated with air hammerextra long shaft with center ball on tipAfter separating the hexagon screw head, the clamp bolt is driven out of the axle housing. The high impact rate combined with powerful impacts breaks up corrosion and allows rust remover to enter.
to press and extract bearings, bushes etc.49 thrust plates: ø 18 - 65 mm (increasing by 1 mm each size), 74 mm1 receiver, can hold max. 2 thrust plates1 impact driveruse accessory thrust plate adapter No. 8752 (not included) to apply thrust plates with air hammer No. 8810also suitable for using in workshop press
to press and extract bearings, bushes etc.17 thrust plates: ø 70 - 150 mm (increasing by 5 mm each size)2 receivers, can hold max. 2 thrust plates1 impact driver1 hexagon key, 3 mmuse accessory thrust plate adapter No. 8752 (not included) to apply thrust plates with air hammer No. 8810also suitable for using in workshop press
to be operated with air hammerafter removing the nut, the guide sleeve is used to lead the pin punchincludes extension bolteasy disassembly through vibration effect