Bearing and Seal Driver Set, 51 pcs., ø 18-74 mm
Bearing and Seal Driver Set, 51 pcs., ø 18-74 mm
126 available
Product information "Bearing and Seal Driver Set, 51 pcs., ø 18-74 mm"
- to press and extract bearings, bushes etc.
- 49 thrust plates: ø 18 - 65 mm (increasing by 1 mm each size), 74 mm
- 1 receiver, can hold max. 2 thrust plates
- 1 impact driver
- use accessory thrust plate adapter No. 8752 (not included) to apply thrust plates with air hammer No. 8810
- also suitable for using in workshop press
| pcs: | 51 |
|---|---|
| Length: | 320 mm |
| Width: | 275 mm |
| Height: | 75 mm |
| Weight: | 7,95 kg |
| EAN: | 4037374054526 |
to apply thrust plates from bearing and set drivers sets Nr. 5452 and 5453 with impact hammers with round shank ø 10 mm
powerful air hammer, universal tool for loosening corroded or tight connectionsthe combination of long stroke and large piston produces over 2000 highly powerful impacts per minutethese vibrations loosen wheel bearings, bushes, conical seat connections (e.g. in track rod ends) and corroded screw connectionsthe vibrations support intrusion of grease, thus helping with disassembly of silent bushesto be applied with specialist chisel set Nr. 8760 and other specialist accessory, making it a universal helper in any workshopcan of course also be used for any standard application requiring chiselswith quick coupling for chisel intaketechnical data: air inlet: 1/4" blows per minute: 2100 piston stroke: 92 mm recommended hose inner-ø: 3/8" (9.5 mm) working pressure: 6.2 bar
powerful air hammer, universal tool for loosening corroded or tight connectionsthe combination of long stroke and large piston produces over 2000 highly powerful impacts per minutethese vibrations loosen wheel bearings, bushes, conical seat connections (e.g. in track rod ends) and corroded screw connectionsthe vibrations support intrusion of grease, thus helping with disassembly of silent bushesto be applied with specialist chisel set Nr. 8760 and other specialist accessory, making it a universal helper in any workshopcan of course also be used for any standard application requiring chiselswith quick coupling for chisel intaketechnical data: air inlet: 1/4" blows per minute: 2100 piston stroke: 92 mm recommended hose inner-ø: 3/8" (9.5 mm) working pressure: 6.2 bar
to apply thrust plates from bearing and set drivers sets Nr. 5452 and 5453 with impact hammers with round shank ø 10 mm