Drills
titanium nitrided, for higher durability and better sliding properties roll forged, manufactured according to DIN 338 edge ground, tip angle 118° for drilling in ordinary steel < 800 N/mm², e.g. steel, cast iron ø 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.5, 10.0 mm
titanium nitrided, for higher durability and better sliding properties roll forged, manufactured according to DIN 338 edge ground, tip angle 118° for drilling in ordinary steel < 800 N/mm², e.g. steel, cast iron ø 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.5, 10.0, 10.5, 11.0, 11.5, 12.0, 12.5, 13.0 mm
5% cobalt alloy for maximum tool life and cutting ability ground from solid material, manufactured according to DIN 338 with split point from 3 mm ø, according to DIN 1412C, tip angle 135° triangle shank from 5 mm ø, to prevent slipping in the chuck ideal for difficult to machine materials, alloyed and unalloyed <1300 N/mm², e.g. V2A, V4A, steel, cast iron each size 10 pcs., ø 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0 mm each size 5 pcs., ø 8.5, 9.0, 9.5, 10.0 mm
5% cobalt alloy for maximum tool life and cutting ability ground from solid material, manufactured according to DIN 338 with split point from 3 mm ø, according to DIN 1412C, tip angle 135° triangle shank from 5 mm ø, to prevent slipping in the chuck ideal for difficult to machine materials, alloyed and unalloyed <1300 N/mm², e.g. V2A, V4A, steel, cast iron ø 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10.0 mm
5% cobalt alloy for maximum tool life and cutting ability ground from solid material, manufactured according to DIN 338 with split point from 3 mm ø, according to DIN 1412C, tip angle 135° triangle shank from 5 mm ø, to prevent slipping in the chuck ideal for difficult to machine materials, alloyed and unalloyed <1300 N/mm², e.g. V2A, V4A, steel, cast iron ø 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0 8.5, 9.0, 9.5, 10.0, 10.5, 11.0, 11.5, 12.0, 12.5, 13.0 mm
fully ground, manufactured according to DIN 338 with split point from 3 mm ø, according to DIN 1412C, tip angle 135° triangle shank from 5 mm ø, to prevent slipping in the chuck ideal for difficult to machine materials < 1100 N/mm², e.g. steel, cast iron each size 10 pcs., ø 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0 mm each size 5 pcs., ø 8.5, 9.0, 9.5, 10.0 mm
fully ground, manufactured according to DIN 338 with split point from 3 mm ø, according to DIN 1412C, tip angle 135° triangle shank from 5 mm ø, to prevent slipping in the chuck ideal for difficult to machine materials < 1100 N/mm², e.g. steel, cast iron ø 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10.0 mm
fully ground, manufactured according to DIN 338 with split point from 3 mm ø, according to DIN 1412C, tip angle 135° triangle shank from 5 mm ø, to prevent slipping in the chuck ideal for difficult to machine materials < 1100 N/mm², e.g. steel, cast iron ø 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10.0, 10.5, 11.0, 11.5, 12.5, 13.0 mm
5% cobalt alloy for maximum tool life and cutting ability ground from solid material, manufactured according to DIN 338 with split point, according to DIN 1412C, tip angle 135° triangle shank from 4.8 mm ø, to prevent slipping in the chuck ideal for difficult to machine materials, alloyed and unalloyed <1300 N/mm², e.g. V2A, V4A, steel, cast iron ø 3.2, 4.8, 6.4, 8.0, 8.7 mm
step tip for precise centering on round surfaces no center-punching required faster and easier drill process as compared to conventional drills 5% cobalt alloy for maximum tool life and cutting ability ground from solid material, manufactured according to DIN 338 with split point and step tip from 3 mm ø, according to DIN 1412C, tip angle 135° triangle shank from 5 mm ø, to prevent slipping in the chuck ideal for difficult to machine materials, alloyed and unalloyed <1300 N/mm², e.g. V2A, V4A, steel, cast iron ø 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0 8.5, 9.0, 9.5, 10.0, 10.5, 11.0, 11.5, 12.0, 12.5, 13.0 mm
step tip for precise centering on round surfaces no center-punching required faster and easier drill process as compared to conventional drills fully ground, manufactured according to DIN 338 with split point and step tip from 3 mm ø, according to DIN 1412C, tip angle 135° triangle shank from 5 mm ø, to prevent slipping in the chuck ideal for difficult to machine materials < 1100 N/mm², e.g. steel, cast iron ø 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10.0, 10.5, 11.0, 11.5, 12.5, 13.0 mm
5% cobalt alloy for maximum tool life and cutting ability ground from solid material, manufactured according to DIN 338 with split point from 3 mm ø, according to DIN 1412C, tip angle 135° triangle shank from 5 mm ø, to prevent slipping in the chuck ideal for difficult to machine materials, alloyed and unalloyed <1300 N/mm², e.g. V2A, V4A, steel, cast iron
fully ground, manufactured according to DIN 338 with split point from 3 mm ø, according to DIN 1412C, tip angle 135° triangle shank from 5 mm ø, to prevent slipping in the chuck ideal for difficult to machine materials < 1100 N/mm², e.g. steel, cast iron
5% cobalt alloy for maximum tool life and cutting ability ground from solid material, manufactured according to DIN 338 with split point, according to DIN 1412C, tip angle 135° triangle shank from 4.8 mm ø, to prevent slipping in the chuck ideal for difficult to machine materials, alloyed and unalloyed <1300 N/mm², e.g. V2A, V4A, steel, cast iron
for precise drilling at right angles on round materials, surfaces and edges position lines enable quick and easy finding of the drilling position incl. core hole sizes 3.3, 4.2, 6.8 mm for creating threads ø 3.0, 3.3, 3.5, 4.0, 4.2, 4.5, 5.0, 5.5, 6.0, 6.5, 6.8, 7.0, 7.5, 8.0, 8.5, 9.0 and 9.5 mm