Suche nach Motorcodes & OEM Vergleichsnummern
Backordered
for removing the outer sleeve from the front axle beam ø 76 mm accessory for assembly tool 33537300 in Mercedes C-Class W203 my. '00-'07, CLC W203 my. '08-'11, CLK W209 my. '02-'10, CLS W219 my. '04-'10, E-Class W211 my. '02-'09, SLK W171 my. '04-'11, SLK 172 from '11
Backordered
in Mercedes C-Class 204 from '07, CLS 218 from '11, E-Class 207 / 212 from '09, GLK X204 from '08 extandable for use with hydraulic cylinder 32102504. This requires:33903604, 33901613 and 9053220
Backordered
for rear axle casing bearing ø 89 mm, rear axle enables use on further Mercedes models in Mercedes C-Class W203 my. '00-'07, CLC W203 my. '08-'11, CLK W209 my. '02-'10, E-Class W211 my. '02-'09, CLS W219 my. '04-'10, SLK R171 my. '04-'11, SLK R172 from my. '11 extandable for use with hydraulic cylinder 32102504. This requires:33903604, 33901613 and 9053220
Only 1 left
for changing the stub axle on PSA axles also suitable for use with hydraulic cylinder 32102504 for use with:Citroen AX, ZX, Berlingo, Saxo, Xsara, Xsara Break, Xsara PicassoPeugeot 106 I+II, 106 Van, 205 I+II, 205 CC, 205 Kasten, 206, 206 CC, 206 S16, 206 SW, 206 Van, 206+, 306, 306 CC, 306 Break, 306 Van, 309 I+II, 405 I+II, 405 II Break, Partner
Only 1 left
for use with basic unit 33201302 or 33202303 for use with:Toyota Aygo from '05, Peugeot 107 from '05, Citroen C1 from '05
Backordered
for use with basic unit 33201302 or 33202303 for use with:Toyota Yaris my. '99-'06, Yaris Verso from '99
Backordered
for use with basic unit 33201302 or 33202303 in Toyota Yaris my. '99-'06, Yaris Verso from '99, Picnic my. '96-'01Daihatsu Cuore VI my. '03-'07, Cuore VII as of my. '07
Backordered
for use with basic unit 33201302 or 33202303 for use with:Toyota Corolla E12 my. '02-'07, Corolla Verso my. '02-'09, Prius II my. '03-'09
Backordered
for use with basic unit 33201302 or 33202303 in Toyota Yaris from '06
Backordered
for use with basic unit 33201302 or 33202303 in Renault Clio II my. '98-05, Thalia from '00, Twingo from '07
Backordered
for use with basic unit 33201302 or 33202303 in Renault Laguna II my. '01-'07, Renault Laguna III my. '07-´15
Only 2 left
for locking screws on the upper control arm scope of delivery:ejector bracket (item 32282621)complete spindle for ejector bracket (item 32281620)gauge for clamping screw (item 32282641)2x spacer (item 32282642)5x extension pins 8x50 mm (item 32281625)
Only 2 left
for knocking out the control arm on 4-link axles and screwed wheel wheel bearings from the wheel bearing housing on Audi / VW vehicles Audi A4 / A6 / A8 Seat Exeo Skoda Superb VW Passat with exchangeable mandrel (Item 32280601) also for loosening tightly screwed wheel bearings The special cranking and length of the tool enables effortless and precise removal of the ball joints on the control arm as well as the knocking out of bolted wheel bearings. To do this, loosen the 4 screws, insert the mandrel into the bolt head and apply bouncing blows on each bolt head. This makes it possible to change the bearings WITHOUT removing the drive shaft.
Only 1 left
for removal and installation of wheel hubs up to ø 165 mm (cars & vans) for compact bearings with ø 62/66/68/72/75/78/82/85 and 92 mm for removal of all bolted bearings e.g. Audi / VW removal and installation of all screwed hubs / bearing units also Opel Insignia
Backordered
for use with: VW T5 / T6 / Touareg up to 2.5 l
Backordered
for compact bearings (wheel bearings/hub units) with ø 62 - 96 mm suitable for Audi, VW, Ford, Mazda, Volvo, Mitsubishi and Smart for use with extraction sleeve T252 from set 32113421 and pull unit
Backordered
for wheel bearing replacement removal up to 91 mm bearing diameter e.g. Audi A4, A6, A8, VW, DB
Backordered
for wheel bearing replacement stepped 90/55 mm, for spindles M20 e.g. Fiat, Citröen, Peugeot
Backordered
for wheel bearing replacement stepped 84/49 mm, for spindles M20 e.g. Fiat, Citröen, Peugeot
Backordered
for wheel bearing replacement stepped 45/40 mm, for spindles M20 e.g. Fiat, Citröen, Peugeot
Backordered
for use with clamping block 33505501 for stabiliser ø 65 mm in Mercedes Actros I my. ´96-´11, Atego I my. ´98-´04, Axor I+II+III from ´02, Econic I my. ´98-´13 leaf spring ø 64 mm in MAN TGA, TGS, TGXOEM bearing comparison no.MAN 81437220070Mercedes A0003237485, A0003237585, A0003237985
Backordered
for use with clamping block 33505501 for use with MAN