Running Gear - Paschke Profitec

 for countersunk screws in hard-to-reach places ideal for use on truck brake caliper bolts for use with a torque wrenchscope of delivery:slip-on extension, 3/4"ring spanner 24 mm, offsetring spanner 27 mm, offsetfurther ring spanners on request

Spare part for many Paschke thrust piece sets

spare part for 33224201

to press and extract silent bearings up to ø 90 mm e.g. on leaf springs, cab suspension, stabilisers, shock absorbers no dismantling of the axle necessary for use with hydraulic pulling unit 33505201only to be used in combination with half-shell sets 335054...please order vehicle-related half-shell sets separately!

for disassembly, assembly and adjustment of door hinges ratchet spanner angled 60° for hard-to-reach places fine toothed for narrow swivel angle highly loadable up to 80 NM contains the following interchangeable bits:for TX-Star screws: T45, T50,for spline screws: M8, M10for hexagon socket screws: 8 mm for use with:Audi from my. '97VW Golf III + IV, Polo, PassatSeat Arosa, CordobaMercedes-Benz A-ClassRenault Laguna

for drilling out extremely corroded clamping screws on 4-link axles ideal as a supplement e.g. for set 32282202 for use with ejector bracket 32282621

mechanical version, incl. thrust spindle and reducer for pressing out drive shafts out of 4-, 5- and 6-hole wheel hubs suitable for:ø 98-120 mm (4-hole), e.g. Fiat, Ford, Opel, VWø 98-112 mm / 112-130 mm (5-hole), e.g. VW, Audi, BMW, Mercedes, Miniø 160 mm (5-hole), e.g. Ford Transitø 114-130 mm / 139-150 mm (6-hole), e.g. Mercedes Sprinter, VW Crafter, Ford, Hummer, Mitsubishi, Nissan, SUV's

for use with hydraulic cylinder 32102504, thrust bolts 33202603 and nut 9053220 for pressing out drive shafts out of 4-, 5- and 6-hole wheel hubs suitable for:ø 98-120 mm (4-hole), e.g. Fiat, Ford, Opel, VWø 98-112 mm / 112-130 mm (5-hole), e.g. VW, Audi, BMW, Mercedes, Miniø 160 mm (5-hole), e.g. Ford Transitø 114-130 mm / 139-150 mm (6-hole), e.g. Mercedes Sprinter, VW Crafter, Ford, Hummer, Mitsubishi, Nissan, SUV's

for VAG alloy 4-link axles for pressing out the locking screw on the upper control arm for use with spindle 32281620

accessory for spindle 32281620 from Set 32282202

for locking screws on the upper control arm scope of delivery:ejector bracket (item 32282621)complete spindle for ejector bracket (item 32281620)gauge for clamping screw (item 32282641)2x spacer (item 32282642)5x extension pins 8x50 mm (item 32281625)

for knocking out the control arm on 4-link axles and screwed wheel wheel bearings from the wheel bearing housing on Audi / VW vehicles Audi A4 / A6 / A8 Seat Exeo Skoda Superb VW Passat with exchangeable mandrel (Item 32280601) also for loosening tightly screwed wheel bearings The special cranking and length of the tool enables effortless and precise removal of the ball joints on the control arm as well as the knocking out of bolted wheel bearings. To do this, loosen the 4 screws, insert the mandrel into the bolt head and apply bouncing blows on each bolt head. This makes it possible to change the bearings WITHOUT removing the drive shaft.

for extension up to 60 mm reach accessory kit for puller for bearing inner rings 34107300 incl. screws for fixing

spare part for puller for bearing inner rings 34107300

for use with clamping block 33505501 for stabiliser ø 65 mm in Mercedes Actros I my. ´96-´11, Atego I my. ´98-´04, Axor I+II+III from ´02, Econic I my. ´98-´13 leaf spring ø 64 mm in MAN TGA, TGS, TGXOEM bearing comparison no.MAN 81437220070Mercedes A0003237485, A0003237585, A0003237985

for use with clamping block 33505501 for use with MAN

for use with clamping block 33505501 and hydraulic pulling unit item 33505201 for bearing replacement on the upper rear axle stabiliser, ø 75/78 mm, directly on the vehicle for removing, preloading and installing bearings with internal bore in Mercedes Actros from '96, Antos my. '12-'18, Arocs from '13, Atego my. '98-'04, Axor from ‘01, Econic from '98, Zetros from '08 OEM bearing comparison no. A0003238185, A0003265581, A9603261781, A960 323 2385, A960 323 3685

for use with clamping block from 33505301 for stabilisers with pivot bearing ø 84 mm, on rear axles with air suspension in Mercedes Actros I my. '96-'11, Atego I my. '98-'04, Axor I+II+III from '02 Mercedes Bus O405, O408, CitaroOEM bearing comparison no. A9423260050

with thread and protective cap with 3/8" connection thread for coupling delivery without coupling and tension/compression bolt

hose side, with 3/8" NPT internal thread e.g. for hydraulic cylinder 32102504 for connection with hydraulic foot pump also suitable for Nike

cylinder side, with 3/8" NPT external thread e.g. for hydraulic cylinder 32102504 for connection with hydraulic foot pump also suitable for Celette / Enerpac / Sun

hose side, with 3/8" NPT internal thread e.g. for hydraulic cylinder 32102504 for connection with hydraulic foot pump also suitable for Celette / Enerpac / Sun

spare part for spindle 32281620