Suche nach Motorcodes & OEM Vergleichsnummern
69 available
for disassembly and assembly of free-wheel drive pulley in Ford C-Max, Ecosport, Edge, Focus, Galaxy, Kuga, Mondeo, Puma, S-Max, Transit, Transit Connect, Transit Custom, Tourneo Connect in Volvo C30, S40, V50 extra short version, does not require removal of the alternator counterholder: 17 x 21 mm external hex drive loosening tool: T50 bit with 12 mm external hex drive
78 available
for hole-punched timing and belt pulleyssuitable for many popular carsfor loosening fastening bolts on belt pulleysfor counter holding e.g. timing belt sprockets on camshafts or injection pumps
87 available
for hole-punched timing and belt pulleyssuitable for many popular carsfor loosening fastening bolts on belt pulleysfor counter holding e.g. timing belt sprockets on camshafts or injection pumpswith interchangeable pinsadjustable ø 40 - 220 mm
Only 1 left
for pulling and counterholding at the same timeprevents the crankshaft from rotatingflexible assembly spread: 54 mm - 120 mm1/2" square for counterholding, e.g. with a swivel bar (Condor item number 22730)includes 2 fixing bolts each in M6 and M8
30 available
suitable for petrol engines 1.0, 1.1, 1.4 and 1.6 Lin Citroen: Berlingo, Xsarain Peugeot: 106, 205, 206, 306, 307, 405
Only 4 left
supplied in plastic casefor quick removal of tight valve seals without damaging the piloting
48 available
for centering the aggregate carrier bracket during reassemblyexact positioning, therefore avoids tracking alignmentfor jobs which require disassembly of the aggregate carrier brackete.g. for transmission or clutch repairssuitable for cars from Audi, VW, Seat and Skoda
Backordered
specially suitable for Audi, VW, Seat and Skoda enginesfor professional assembly of shaft sealing rings on many popular engines from the VW corporation, also for identically constructed engines from e.g. Fordfor petrol engines 1.2 (3 cyl.), 1.0 - 1.2 - 1.4 - 1.6 - 1.8 - 2.0 (4 cyl.): crankshaft, camshaft and countershaft (belt pulley side)for petrol engines 5 cyl. with PTFE shaft sealing ring, 6 cyl.: crankshaft (belt pulley side)for diesel engines 1.2 - 1.4 (3 cyl.), 1.4 - 1.6 - 1.9 - 2.4 - 2.5: crankshaft, camshaft and countershaft (belt pulley side)
11 available
for Mercedes engines M271 and M272for professional assembly of the rear crankshaft sealing ring
57 available
for lowering the subframemounting orientation remains unchangedfor replacing original bolts on supported enginegive 20 cm extra space in upper engine compartmentrequired when working on starter or turbo charger
15 available
e.g. for Mercedes-Benz CDI-enginesfor removing deposits in glow plug shaftsfor pulling out tight glow plugs
Only 5 left
to drill out tight or broken glow plugsfor Audi / VW 2.5, 2.7 and 3.0 L V6-TDI enginesfor drilling out glow plugs with M10x1.0 threadfor rethreading or replacing glow plug threadrepair is possible without cylinder head disassemblyin VW Passat, Touareg and Phaetonin Audi A4, A6, A8 and Q7in Skoda Superb
Only 4 left
66 available
for 1.0 L, 1.0 L TSI / TFSI, 1.2 L TSI, 1.4 L TSI / TFSI and 2.0 GTI enginesin VW Beetle (from ´14), Caddy (from ´15), Eos (from ´06), Golf (from ´13), Passat (from ´14), Polo (from ´12), Sharan (from ´15), Tiguan (from ´15) Touran (from ´15) and Up (from ´11)in Audi A1 (from ´12) and A3 (from ´13)in Seat Ibiza (from ´13), Leon (from ´13) and Mii (from ´11)in Skoda Citigo (from ´11), Fabia (from ´14) and Octavia (from ´13)to disengage and install pencil coils with final output stageavoids damage to coil and housing
44 available
for many popular injection engine from the VW corporationto disengage and install ignition coils with final output stage
127 available
also for deep-seated threads in the cylinder headthread chaser with expandable conus allows cutting process to begin inside and move outside during procedureideal also for cleaning the threadto prevent spark or glow plugs from getting stucka clean thread is essential for smooth installation of new plugse.g. for BMW, Citroen, Mercedes, Mini, Peugeot, Renault, VWmanufactured from chrome-molybdenum steel
Backordered
43 available
for professional replacement of the Teflon combustion chamber seal of the injector nozzleincludes the necessary tools for removing, sliding on and compressingTeflon sealing material expands when heated by engine temperature, providing an optimum fit and seal. The Teflon gasket at the tip of the injector must be replaced after the injector has been removed. According to the manufacturer‘s instructions, reuse is not permitted. The material also expands when applied to the tip of the injection nozzle and must be compressed accordingly.
Only 7 left
for diesel engines with SDI and TDI injection systemsfor professional assembly and disassembly of diesel injectorsalso for Common-Rail and pump-nozzle injection systemswith sliding hammer for removing tight components
Backordered
for petrol and diesel engines with FSI, SDI and TDI injection systemsfor professional assembly and disassembly of injectorsalso for Common-Rail and pump-nozzle injection systemswith sliding hammer for removing tight components
121 available
for 1.2, 1.4, 1.6 and 2.0 L TDI Common-Rail enginesalso for the new engines built from 2013 in VW Amarock, Arteon, Beetle II, Caddy III/IV, Eos, Golf VI/VII, Jetta III/IV, Passat (3C/36/3G/CC), Polo (6R/AW), Scirocco III, Sharan (7N), Tiguan (5N/AD/BW), Touran (1T/5T), T-Roc, T5/T6 and Crafterin Audi A1 (8X), A3 (8P/8V), A4 (B8/B9), A5 (8T/F), A6 (C7), Q2, Q3 (8P/8V), Q5 (8R/FY) and TT (8J)in Skoda Fabia II, Karoq, Octavia II/III, Rapid, Roomster, Scala, Superb II/III and Yetiin Seat Alhambra, Altea (5P), Arona, Ateca, Exeo, Ibiza IV/V, Leon (1P/5F), Tarraco and Toledo IVwhen disassembling the piezo injectors for sealing or engine repair