Skip to main content Skip to search Skip to main navigation

Suche nach Motorcodes & OEM Vergleichsnummern

Filter products

Backordered

Mounting cone
Product number: 6171-05
Variants: Mounting cone (6171-05)

Only 2 left

Diesel Injector Puller Set, M17x1 + M27x1, MB
Product number: 5427

for pulling carbonised injectors from cylinder headwith swivel adapter, prevents canting of injector through centric pulling forcewith injector hook, for protective removal of the injectorwith 2 thread adapters, for pulling extremely tight injectors (damages injector and requires replacement)

24 available

Diesel Injector Hook and Thread Adapter Set, 10 pcs.
Product number: 3311

for removing carbonised injectors5x thread adapters to screw on injectors: M14x1.5, for Bosch / Delphi injectors, e.g. BMW (M47), MB (OM 629 / 642 / 646), PSA (DV4 / DW12), VW (CBD) M17x1.0, for Bosch injectors, e.g. Alfa, BMW, Fiat, MB, PSA, Renault M20x1.0, for Denso injectors M25x1.0, for Siemens injectors, e.g. PSA (DW10) M27x1.0, for Siemens injectors, e.g. PSA (DW10)3x disassembly hooks, protective disassembly procedure, reuse of removed injector possible: jaw width 12 mm, e.g. Mercedes CDI (except A-class / Sprinter / Vito) jaw width 13 mm, e.g. Renault, Opel or Nissan with F9Q engine jaw width 16 mm, e.g. Citroen C5 / Jumpy / Xsara, Fiat Ducato JTD, Peugeot 206 / 307 / 406 / Boxer (2.0 / 2.2 / 2.3 HDI)1x universal joint: prevents canting of injector through centric pulling force provides high flexibility during operation, because potentially disturbing components in engine compartment can be bypassed instead of being removed1x specialist injector socket bit, hexagon tamperproof, for removing the, retainer ring, e.g. Bosch injectors on MB CDI and PSA HDIwith connecting thread M18x1.5, e.g. suitable for slide hammers Condor no. 4925 or 4928with storage space for accessory item Condor no. 3305/20I: thread adapter M18x1.5 X M20x1.5 (not included in delivery!), designed to apply injector hook and thread adapters with sliding hammers from other manufacturers (with connecting thread M20x1.5)

13 available

Specialist Sockets for Diesel Injectors, 4 pcs., 1/2", PSA
Product number: 4772

slotted design to include connector

Only 7 left

Diesel Injector Remover, PSA HDI DW10/DW12
Product number: 3339

also for identically constructed engines from Fiat, Lancia and Suzukifor pulling Bosch and Siemens injectorswithout disassembling cylinder headsupport structure and ball bearing produce high pulling forcewith 3 specialist disassembly socketsfor 2.0 and 2.2 HDI-diesel engines

Only 4 left

Common Rail Injector Puller, MB CDI-engines
Product number: 2100

for removing extremely tight injectors from cylinder headdisassembly with pulling spindle and support cylinder, very high pulling forcesuitable for e.g. Mercedes CDI-engines

Only 4 left

Diesel Injection Pump Installation Tool, Ford
Product number: 36225

for 2.0 L EcoBlue TDCI 4-cylinder diesel engines in Ford Edge, Focus IV, Galaxy III, Kuga III, Mondeo V, Ranger (T6), S-Max II, Tourneo Custom, Transit VII and Transit Custom for disassembly and assembly of the injection pump for engine repair

17 available

Fuel Pump Timing Tool, Renault 1.9 F8Q/F9Q
Product number: 5620

also for identically constructed engines from Mitsubishi, Opel and Volvofor 1.9 L Renault diesel direct injection enginesin Renault Megane, Scenic and Kangooin Mitsubishi Carisma and in Volvo S40 and V40in Opel Arena and Movano

77 available

Locking Tool, high-pressure pump sprocket, Renault F9Q
Product number: 5621

for identically constructed engines from Nissan, Opel and RenaultFor locking the high-pressure pump sprocket during assembly and disassembly of the high-pressure pump. Avoids subsequent timing adjustments, because timing belt is not removed. Provides time and cost savings.in Renault Megane, Scenic and Kangooin Nissan vehiclesin Opel Arena and Movano

61 available

Injection Line Wrench, bi-hex 17 mm
Product number: 4078

suitable for TDI-engines from Audi / VWfor diesel injection lines on distributors and in-line injection pumpsfor hard to reach injectorsalso for sensors and senders with cable connectionsspecial offset and angled design

48 available

Injection Line Wrench, bi-hex 14 mm
Product number: 4074

suitable for HDi-engines from PSAfor diesel injection lines on distributors and in-line injection pumpsfor hard to reach injectorsalso for sensors and senders with cable connectionsspecial offset and angled design

28 available

Hose Clamp Pliers, bowden wire 630 mm, Audi / VW
Product number: 4751

suitable for VW specialist clamps with parallel clamp endse.g. for intercooler nozzle VW 2.0 TDI (BKD)suitable for Audi A3, VW Golf 5, Passat, Touranplier with ratchet mechanism and release lever

167 available

Assembly Lever for UFI Filter Housing, incl. 2 adapters
Product number: 4857
Variants: (4857)

to avoid leakage through damaged housingfor Audi / VW 2.0L TDI enginesincl. 2 adapters for new generation vehicles, e.g. VW Golf VII / Audi A3 / Seat Leonapplication:When assembling the UFI fuel filter housing, the housing lid can easily get damaged, which can cause a leakage to the fuel system. This assembly lever holds down the housing lid before the fixing bolts are tightened. The bolts can now be fastened crosswise and damage caused through deforming is avoided.

261 available

Diesel Fuel Filter Remover, Opel / Fiat
Product number: 4855A

prevents damage to filter housingsuitable for tightening with torque wrenchfor Opel and Fiat/Lancia enginesDisassemble filter housing and place together with protection sleeve in vice. Then use wrench to remove lid from housing and replace filter element.

449 available

Diesel fuel filter release spanner, 1/2″, Ford
Product number: 35620

in Ford Transit with 2.2 L TDCi engine for damage-free loosening and tightening of the fuel filter cover prevents damage to the fuel filter housing and fastening ring required for changing the fuel filter element suitable for tightening with torque spanner

70 available

Special Loosening Wrench for AdBlue® Filler Caps, Citroen / Peugeot
Product number: 4880

in Citroen Berlingo, C3, C3 Picasso, C4 Cactus, C4 Picasso, C4 Grand Picasso, C5, DS3 and Jumpy in Peugeot 208, 307, 308, 308SW, 508, 508SW, 2008, Expert, Partner, Rifter and Traveller for damage-free loosening and tightening of the hard-to-reach AdBlue® filler cap screw connection required when fuel filler cap is stuck, e.g. due to crystallised urea or over-tightening with 3/8" sq. drive and 17 mm external hexagon

Only 2 left

Radiator Cap No. 4
Product number: 5043-04
Variants: Radiator Cap No. 4 (5043-04)

Iveco Daily 2000 C SerieMAN TGARenault Kerax / Magnum / Midlum / Premium

129 available

Radiator Cap No. 23, pink / grey
Product number: 355A-23

for sets No. 355A and 5044 for new generation vehicles from Audi / VW for expansion tanks with internal thread M45 x 3 suitable for:Audi A1, A3, A4, A5, A6, A7, A8, Q2, Q3, Q5, Q7, R8, TT, TTS and TTRSVW Amarok, Beetle, Bora, Caddy, Eos, Golf, Jetta, Passat, Phaeton, Polo, Scirocco, Sharan, T5 (also Multivan/Caravelle), Tiguan, Touareg, Touran and up!Seat Alhambra, Altea, Cordoba, Exeo, Ibiza, Leon, Mii and ToledoSkoda Citigo, Fabia, Octavia, Rapid, Roomster, Superb and YetiPorsche Carrera

43 available

Hose Clamp Pliers, for CLIC-L clamps
Product number: 4723
Variants: (4723)

for releasing and fitting re-usable CLIC-L hose clampshardened jawfor VW, Audi, Citroen, Mercedes, Opel, Peugeot, Seat, Skoda etc.

625 available

Hose Unlocking Tool for HENN clamps
Product number: 4732

for unlocking / releasing HENN clamps, e.g. on charge air- or cooling water hoses2-fold handle adjustment (straight / 90°) for use even in hard-to-reach areasto prevent damage to the locking springfor use on VW, Audi, Seat, Skoda, BMW, Citroen, Dacia, Fiat, Ford, Kia, Lexus, Mazda, Mercedes, Nissan, Opel, Peugeot, Porsche, Renault, Toyota and Volvo

291 available

Hose Clamp Set, for ø up to 10, 15, 25 and 45 mm, 4 pcs.
Product number: 4754

with swivel hook for easy fixingfor clamping e.g. radiator and fuel lines

257 available

Exhaust Clamp Pliers, PSA
Product number: 4744

for opening and holding self-tensioning exhaust clampswith locking mechanism for holding clamps in open position

287 available

New
Specialist Socket, for turbo charger inlet manifold, specialist profile 8-point
Product number: 4277

for Fiat, Mercedes, Nissan, Opel and Renault with 1.6 L turbo diesel engines for specialist 8-point screw between turbo charger and inlet manifold essential tool for repairs in Renault Trafic, Megane, Espace, Fluence, Kadjar, Koleos, Scenic and Talisman in Mercedes Citan, A-class, B-class and Vito (W447) in Nissan NV300, Qashqai and X-Trail in Opel Vivaro in Fiat Talento

Only 9 left

Adapter, M12x1.25
Product number: 3996-116
Variants: Adapter, M12x1.25 (3996-116)

for refilling transmission oil also with other pump systems